Microscope Lamps and Accessories
Electron Microscopy Sciences CoverWell™ Perfusion Chamber 1 well with 300 µl volume
CoverWell Perfusion Chambers allows up to 16 different specimens on one coverglass. "Press-to-Seal" covers form water-tight, multiwall cell incubation or cytochemistry chamber when pressed to coverslips or microscope slides. Reagents can be quickly added and removed through dual access ports (1.5 mm Dia) without disturbing or cross-contaminating specimens in adjacent wells. Chambers are removable for permanent mounting of specimens. CoverWell chambers are made from medical grade silicone bonded to clear, UV transparent plastic.
Volume: 300 µl
Electron Microscopy Sciences Tripod Polisher Parallel Polishing Mount Stainless Steel
Parallel Polishing Mount (S. Steel) - For use with Tripod Polisher Model 590.
Electron Microscopy Sciences PremaDisk S-EC Diamond Grinding Disc, 200 mm diameter, 6µm Particles
These new universal grinding pads for all magnetic systems will replace 200-300 SiC paper discs saving you not only preparation time, but also money. The very high stock removal rate results in fast and clean mounting. Thickness of 0.2 mm with a non-erosion backing. Only water coolant is needed. Replacement for Piano, Cameo, Galaxy, and Apex DGD.
Diameter: 200 mm
Particles: 6µm
Electron Microscopy Sciences Calibration Specimen 300-2D, Unmounted
SPM calibration specimens are produced by holographic fabrication that assures high accuracy and precision. The standards provide easier testing of your SPM, improved accuracy of critical dimension measurements and accuracy of 0.5% (1 std. dev.). The pattern height of greater than 100nm provides excellent image contrast. There is uniform coverage of entire chip which allows for imaging anywhere on the chip. 300-2D, pattern: array of posts, nominal pitch: 300 nm, material: W-coated photoresist on Si.
Mount: Unmounted
Electron Microscopy Sciences Microscope Graticule NE2 Verticle, 19 mm, 10 mm with 0.1 mm subdivisions
These scales are used for the measuring of lengths of specimen or distances between points on a variety of different shaped objects. By dividing the division of the chosen graticule by the magnification of the objective one obtains an approximate value that each division will represent on the stage. Vertical micrometer scale.
Size: 19 mm
Electron Microscopy Sciences Crossed Gauge Lines Microscope Graticule NE 54, 21mm
Use as crossed lines, but for the measuring of distances between thelines. Greater accuracy can be obtained by locatng the specimen detail between the graticules gauge pair.
Size: 21mm
Divisions: Two vertical lines 0.2 mm apart
Electron Microscopy Sciences EMS Gold Aperture with 20 µm hole, 3 mm O.D., 0.12 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 20 µm
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences CoverWell™ Imaging Chamber 1 well 20 mm, 1.7mm depth, 520 µl Volume
CoverWell Imaging reusable press-to-seal silicone chambers form a removable enclosure for repeat staining or specimen repositioning. The chambers are designed to stabilize and support thick and free-floating specimens for confocal microscopy and imaging applications.
Diameter: 20 mm
Depth: 1.7 mm
Volume: 520 µl
O.D.: 25 mm x 25 mm
Electron Microscopy Sciences Synaptek NUMBERED Grid with 2x1 mm slot, Beryllium-Copper
Synaptek unflexible grids are made of a special Beryllium-Copper alloy and very reliable under the electron beam. Offer extreme stability for coating with support film. 4 mil thick (100um), 3.05 mm diameter. Contamination free and reusable after cleaning.
I.D.: 2x1 mm slot
Material: Beryllium-Copper
Morrell Instrument Company Inc CFI PLAN ACHROMAT 10X / 0.25 /
Morrell is only authorized to sell the following products in New York, New Jersey, Pennsylvania, Maryland, Washington DC, Delaware, Virginia, West Virginia, Ohio, Indiana, and Kentucky.
Electron Microscopy Sciences EMS Platinum Aperture with 5 µm hole, 0.53 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 5 µm
O.D.: 2 mm
Thickness: 0.53 mm
Electron Microscopy Sciences MicroMounts™ Crystal Tool with 20 µm Aperture and 19 mm pin
MicroMounts are the high performance tools for manipulating and mounting protein crystals, virus crystals, and small molecule/inorganic crystals, and other small, fragile samples. They are ideal for both conventional and high-throughput X-ray crystallography applications.
Each consist of a thin (7.5um thick) micro-fabricated polyimide film, attached to a solid non-magnetic stainless steel pin. Film is wrapped around the steel pin and it provides excellent stiffness and convenient scoop-like action in retrieving and handling crystals.
Aperture: 19 mm pin
Electron Microscopy Sciences EMS Gold Aperture with 40 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 40 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences PS12 Micrometer Standard with UKAS Cert
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. A UKAS accredited laboratory carries out measurements at selected points on the scales and grids and issues a calibration certificate.
Electron Microscopy Sciences BEEM Dial-A-Grid & Block Storage
Two tone color coded plastic box with insert which has 24 letter-labeled crossed slots and 2 cavities for block storage. A rotating protection plate covers the slots and allows for exposure of one grid at a time. There are two additional cavities for block storage. BEEM Is A Registered Trademark of Better Equipment For Electron Microscopy, Inc.